Official Infinix Zero 3 X552 Stock Rom
Official Infinix Zero 3 X552 stock rom
If you are looking for the official stock firmware for your Infinix Zero 3 X552 smartphone, then you have come to the right place. In this article, we will provide you with the download links, flash tool, USB driver, and how to install the firmware on your device.
The Infinix Zero 3 X552 is a flagship device from Infinix that was launched in 2015. It features a 5.5-inch full HD display, a MediaTek Helio X10 octa-core processor, 3GB of RAM, 16GB or 32GB of internal storage, a 20.7MP rear camera, a 5MP front camera, and a 3030mAh battery. It runs on Android 5.1 Lollipop with Infinix's custom UI called XUI.
DOWNLOAD: https://urlcod.com/2w3ey2
The stock firmware or ROM is the official operating system that comes pre-installed on your device. It is also known as the factory firmware or the default firmware. Flashing or installing the stock firmware can help you to fix various issues on your device, such as bootloop, software errors, IMEI problems, performance issues, battery drain, etc. It can also help you to upgrade or downgrade your device to a newer or older version of Android.
Download links for Infinix Zero 3 X552 stock rom
There are two versions of the stock firmware for the Infinix Zero 3 X552: H952_A1 and H952_B1. The H952_A1 version is compatible with devices that have a serial number starting with A1, while the H952_B1 version is compatible with devices that have a serial number starting with B1. You can check your device's serial number by removing the back cover and looking at the sticker below the battery.
The download links for the Infinix Zero 3 X552 stock rom are provided below. Each link contains a zip file that includes the firmware file, the flash tool, the USB driver, and a manual on how to flash the firmware. You will need to download all four parts of each link and extract them using a tool like WinRAR or 7-Zip.
H952_A1 version:
H952_B1 version:
How to install Infinix Zero 3 X552 stock rom
Before you proceed to install the stock firmware on your Infinix Zero 3 X552, you need to take some precautions and backup your data. Flashing the firmware will erase all your personal data and settings on your device, so make sure you have a backup of everything you need. You also need to charge your device to at least 50% battery level to avoid any interruptions during the flashing process.
Once you have downloaded and extracted the zip files for your device's version, follow these steps to install the stock firmware on your Infinix Zero 3 X552:
Install the USB driver on your computer. You can find it in the extracted folder named "USB Driver".
Run the flash tool on your computer. You can find it in the extracted folder named "Flash Tool".
Click on "Scatter-loading" and browse to the extracted folder named "Firmware". Select the file named "MT6795_Android_scatter.txt".
Click on "Download" and connect your device to your computer via USB cable while holding the volume down button.
Wait for the flashing process to complete. You will see a green circle with a check mark when it is done.
Disconnect your device and reboot it.
Congratulations, you have successfully installed the official stock firmware on your Infinix Zero 3 X552. You can now enjoy the smooth and stable performance of your device. If you have any questions or problems, feel free to leave a comment below.